Product ID:CAN DO ENAMEL-CHINESE RED, 315
MSDS Date:05/01/1986
FSC:8010
NIIN:00N059024
MSDS Number: BXJCD

COWMAN-CAMPBELL PAINT CO

5221 BALLARD AVE NW
SEATTLE, WA 98107
US

Emergency Phone: 206-783-8835

Info Phone: 206-783-8835

Cage: HO230

COWMAN-CAMPBELL PAINT CO

SEATTLE, WA 98107 US

Cage: HO230

STODDARD SOLVENT; (MINERAL SPIRITS)

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 42.50%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM

(TC19C) IS RECOMMENDED.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:DATA AVAILABLE FOR A SIMILAR MATERIAL
INDICATES THAT THIS MATERIAL IS NOT EXPECTED TO BE ACUTELY TOXIC.
SIGNS & SYMPTOMS OF CENTRAL NERVOUS SYSTEM DEPRESSION MAY INCLUDE
ONE OR MORE OF THE FOLLOWING: HEADACHE, DIZZINESS, LOSS OF
APPETITE, WEAKNESS & LOSS OF CO-ORDINATION. EFFECTED PERSONS WILL
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:EXPERIENCE COMPLETE RECOVERY WHEN
REMOVED FROM THE AREA.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES:RINSE W/WATER FOR AT LEAST 15 MINUTES. INHAL:MOVE PERSON
TO FRESH AIR. IF BREATHING HAS STOPPED, APPLY ARTIFICIAL
RESPIRATION. CALL MD IMMEDIATELY. INGEST:DO NOT INDUCE VOMITING.
CALL MD IMMEDIAT ELY. SKIN:WASH THOROUGHLY W/SOAP & WATER FOLLOWING
CONTACT.

Flash Point Method:TCC
Flash Point:105F,41C
Lower Limits:1%
Upper Limits:6%
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM, WATER SPRAY.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
FOR FIRES INVOLVING THIS MATL, DO NOT ENTER ANY CLOSED OR CONFINED
FIRE SPACES W/OUT PROPER PROT EQUIP.
Unusual Fire/Explosion Hazard:LIQ EVAPS & FORMS VAP (FUMES) WHICH CAN
CATCH FIRE & BURN W/EXPLO VIOLENCE. INVISIBLE VAP SPREADS EASILY &
CAN BE SET ON FIRE BY MANY SOURCES SUCH AS (SUPDAT)

Spill Release Procedures:CLEAN UP SPILLS AS SOON AS POSSIBLE. ABSORB
LARGE SPILLS W/ABSORBENT CLAY, DIATOMACEOUS EARTH OR OTHER SUITABLE
MATERIAL. A FIRE OR VAPOR HAZARD MAY EXIST SINCE THESE CLEANUP
MATERIALS WILL ONLY ABSOR B LIQUID THEY WILL NOT ABSORB VAPOR.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:CLSD CNTNRS MAY EXPLODE WHEN EXPOS TO
EXTREME HEAT. STORE AWAY FROM HEAT, SPARKS & FLAMES. AVOID
PROLONGED SKIN CONTACT. DO NOT BREATHE SPRAY MIST.
Other Precautions:GROUND CNTNRS WHILE POURING & LIM FREE FALL TO A FEW
INCHES TO PREVENT STATIC SPARKS. AVOID SPONTANEOUS COMBUST OF
CONTAM RAGS & OTHER EASILY IGNITABLE ORGANIC ACCUMULATIONS BY IMMED
IMMERSION IN WATE R. DON'T CUT, PUNCTURE/WELD NEAR CNTNR.

Respiratory Protection:WEAR NIOSH/MSHA APPRVD ORG VAP CARTRIDGE RESP
UNLESS VENT IS ADEQ. FOLLOW OSHA REG 29 CFR 1910.134 FOR RESP USE.
USE NIOSH/MSHA APPRVD AIR-PURIFYING RESP THAT SUPPLIER HAS
DEMONSTRATED TO BE EFTIVE FO R SOLV VAPS, WHEN CONCS EXCEED
(SUPDAT)
Ventilation:LOCAL EXHAUST: PROVIDE VOLUME TO PREVENT VAPOR
CONCENTRATION IN EXCESS OF TLV.
Protective Gloves:NEOPRENE OR RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH & DELUGE SHOWER WHICH MEET ANSI
DESIGN CRITERIA.EYE WASH FACILITY SHOULD BE ACCESSIBLE IN THE WORK
AREA.
Work Hygienic Practices:INDIVIDUALS WORKING W/THIS MATL SHOULD WASH
THEIR HANDS THORO BEFORE EATING, DRINKING, SMOKING/USING TOILET
FACILITIES.
Supplemental Safety and Health
EXPLO HAZ:PILOT LIGHTS, WELDING EQUIP & ELEC MOTORS & SWITCHES. FIRE
HAZ IS GREATER AS LIQ TEMP RISES >85F. RESP PROT:TLV UP TO MAX
LEVEL AT WHICH RESP IS EFTIVE. IF CONC OF SOLVS IS NOT
KNOWN/EXCEEDS LEVEL AT WHICH NIOSH/MSHA APPRVD AIR-PURIFYING RESP
IS EFTIVE, A NIOSH/MSHA APPRVD POS PRESS AIR-SUPPLIED RESP (ING 2)

Boiling Pt:B.P. Text:>314F,>157C
Vapor Pres:5 @ 77F
Vapor Density:4.9
Spec Gravity:1 (H*2O=1)
Evaporation Rate & Reference:0.13 (BUTYL ACETATE=1)
Appearance and Odor:OPAQUE LIQUID; PETROLEUM DISTILLATE ODOR.
Percent Volatiles by Volume:55

Stability Indicator/Materials to Avoid:YES
MAY REACT W/STRONG OXIDIZING MATERIALS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NORMAL COMBUSTION FORMS CARBON DIOXIDE
& WATER VAPOR; INCOMPLETE COMBUSTION CAN PRODUCE CARBON MONOXIDE.

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS . DISPOSE OF MATERIAL IN APPROVED LOCAL OR STATE
FACILITY FOR HANDLING HAZARDOUS WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.